Sandblasting is used to clean surfaces, remove rust, oxidation, or finishes, preparing surfaces for new coating applications. It is highly effective for large equipment, surface prepping and paint/rust removal.
Sandblasting is a general term used to describe the act of propelling very fine bits of material at high-velocity to clean or etch a surface. Sand used to be the most commonly used material, but since the lung disease silicosis is caused by extended inhalation of the dust created by sand, other materials are now used in its place. Any small, relatively uniform particles will work, such as steel grit, copper slag, walnut shells, powdered abrasives, even bits of coconut shell. Due to the dangers of inhaling dust during the process, sandblasting is carefully controlled, using an alternate air supply, protective wear, and proper ventilation.
A sandblasting setup usually consists of three different parts: the abrasive itself, an air compressor, and a blaster nozzle. For etching and small object cleaning, a workstation to hold the piece of glass is also needed, as is some sort of collector to gather up excess dust. Sandblasting is primarily used for two somewhat different applications. The first of these is to clean a surface of anything that may be clinging to it. The second is to either etch or carve designs or words into glass or a similar material.
Sand blasting service, sand blasting, sandblast, spray paint, epoxy paint, oil paint, tank paint work, water tank spraying, oil tank spraying
Structural strengthening using Carbon Fiber Reinforced Polymer (CFRP), a lightweight yet extremely strong material ideal for beams, slabs, and columns, enhancing load capacity without altering structure dimensions.
Comprehensive repair services for large concrete structures such as buildings, factories, bridges, and infrastructure. Our expert engineers use high-performance materials to restore durability, safety, and service life.
A sandblasting setup usually consists of three different parts: the abrasive itself, an air compressor, and a blaster nozzle.
For etching and small object cleaning, a workstation to hold the piece of glass is also needed, as is some sort of collector to gather up excess dust.
special silicate solution that has the ability to help increase skin toughness to the concrete surface and help prevent dust
General term used to describe the act of propelling very fine bits of material at high-velocity to clean or etch a surface.