Sandblasting is used to clean surfaces, remove rust, oxidation, or finishes, preparing surfaces for new coating applications. It is highly effective for large equipment, surface prepping and paint/rust removal.
Sandblasting is a general term used to describe the act of propelling very fine bits of material at high-velocity to clean or etch a surface. Sand used to be the most commonly used material, but since the lung disease silicosis is caused by extended inhalation of the dust created by sand, other materials are now used in its place. Any small, relatively uniform particles will work, such as steel grit, copper slag, walnut shells, powdered abrasives, even bits of coconut shell. Due to the dangers of inhaling dust during the process, sandblasting is carefully controlled, using an alternate air supply, protective wear, and proper ventilation.
A sandblasting setup usually consists of three different parts: the abrasive itself, an air compressor, and a blaster nozzle. For etching and small object cleaning, a workstation to hold the piece of glass is also needed, as is some sort of collector to gather up excess dust. Sandblasting is primarily used for two somewhat different applications. The first of these is to clean a surface of anything that may be clinging to it. The second is to either etch or carve designs or words into glass or a similar material.
A sandblasting setup usually consists of three different parts: the abrasive itself, an air compressor, and a blaster nozzle.
Comprehensive repair services for large concrete structures such as buildings, factories, bridges, and infrastructure. Our expert engineers use high-performance materials to restore durability, safety, and service life.
Sprayed Sand Galvanized Plating. Sandblasting is a general term used to describe the act of propelling very fine bits of material at high-velocity.
Sprayed Peeling Painting Water Tunnel of EGAT Electricity (Generating Authority of Thailand).
The first of these is to clean a surface of anything that may be clinging to it. The second is to either etch or carve designs or words into glass.
Sand used to be the most commonly used material, but since the lung disease silicosis is caused by extended inhalation.
Sandblasting is used to clean surfaces, remove rust, oxidation, or finishes, preparing surfaces for new coating applications.
Reinforcement of large concrete bridge piers using steel jacketing or CFRP wrapping techniques to improve load-bearing capacity, prevent cracking, and ensure long-term stability.